Kreg Owners' Community

Connal Jackson's Comments

Comment Wall (2 comments)

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

At 2:12pm on February 3, 2015, Zac Taubman said…

Hi Connal,

I don't really have plans for this Dresser, but if your interested, I do have some info that I started with that I can send you.

At 5:55pm on December 17, 2014, Thomas Terlisner said…

I own the K4ms and 3 clamps. I have also got a jointer by porter cable and I grab my pocket hole jig before that always. Its just so simple to use and excellent results. I would describe myself as a pretty good carpenter and woodworker. I built all my cabinets in my garage and also converted my 3rd bedroom into my office. Here I built floor to ceiling cabinets with recessed area for my computer. I also built a closet organizer in this room which still has to be finished but I'm procrastinating on this a little bit. I worked for the Post Office for 29 years and this is where I got most of my experience as a woodworker, lots of remodeling in three states. For myself I was drafted in the Army in 1966 but fortunately I was able to join the Navy for the extra 2 years enlistment. I had one tour off the coast of Viet Nam on the USS Ranger CVA-61 an attack carrier. I've been married  to the same woman for 39 happy years and counting. Right now I have been working on a blanket chest for my wife and I should be done after the 1st of the year. I love the Kreg community where I can see other work done by many accomplished wood workers alike. Have a Merry Christmas and Happy New Year.

Tom T

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_