Kreg Owners' Community

Thomas Faulkner's Comments

Comment Wall (3 comments)

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

At 1:55pm on December 9, 2014, Lamont P said…

Tom,  I hope this goes through do to the size of the word doc but attached is a brief description of my bar construction.  Bar%20Plan%20Basics.docx

At 2:00pm on December 8, 2014, Lamont P said…

Thanks for the compliment re the pub bar Tom.  I will shortly send you a basic description of how I built the bar.  I have plans but they were custom to the location that I built the bar which is in a basement cement alcove shaped like a bay window that mirrors the bay window in our kitchen on the first floor. The odd angle configuration was probably the toughest obstacle to building the back bar part.  Giving exact plans may not make sense do the that configuration and not knowing what space you may be working with.  But I will attach later a write-up that may help in you designing your own bar. 

At 10:28pm on November 10, 2014, james wilhelm said…

Thomas , welcome to the community ,  this Is a great place to get new Ideas and see all the new tools out there , have a good day , JIM !!

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_