Kreg Owners' Community

I am wanting to build a dresser a four or five drawer. If anyone has some plans it would be a great help.
Thanks

Views: 210

Reply to This

Replies to This Discussion

Hello Chris.  We have listed a variety of reputable online sources for free project plans and inspiration here.  By browsing these blogs and websites, you should be able to find a plan that fits your space, style, and storage needs.  Happy Building! 

Chris,

Try this page: http://www.freewoodworkingplan.com/index.php?cat=677&topic=bedr...

Lots of dresser plane.

Hope this helps, Don

Chris, I just finished a dresser that I got from Ana White page. It was a 6 draw on wheels, but I made some modifications and the end result was what you'll see if you look at my project. I think it posted. if not let me know and I'll send you the finished project.

Chri,

Here is a link to the 6 drawer dresser I built.  http://kregjig.ning.com/photo/albums/hickory-6-drawer-dresser

Unfortunately I do not have plans that I made on a computer or even detailed drawings I could scan, just assorted rough sketches and notes.  However, construction is as follows: 1) face frame for the front. 2) face frame for the bottom. 3) glued up solid panel sides. 4) glued up solid panel top. 5) 1/4 inch plywood back. 6) drawers and false fronts.  I did add the decorative touches to the front face frame and drawer false fronts, and the beveling on the top and bottom face frame.

Don

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_