Make your own shop-made clamping & assembly workbench.
........
Kreg Klamp Track
locate several of these units, banked side-by-side, to the desired depth of your top.
Make a work-top base from 3/4" MDF, or the like, to a width and depth, as applicable.
Fasten the tracks to the base.
Secure the assembled components to work-stand.
This concept will permit nearly limitless clamping opportunities.
Tags:
Jay, somehow I missed your last response to this thread, sorry about that. We did actually just purchase the clamping table so I guess that issue is handled. I still hope our cabinets turn out well like yours do.
Suzy, missing something on here is to be expected as there is a lot of posting to read. I am confident that your cabinets will turn out just fine. Have a problem building them or just a question about the process, I am always here and glad to help.
Suzy said:
Jay, somehow I missed your last response to this thread, sorry about that. We did actually just purchase the clamping table so I guess that issue is handled. I still hope our cabinets turn out well like yours do.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service