Kreg Owners' Community

Laundry room cabinets

Rating:
  • Currently 0/5 stars.

Views: 298

Favorite of 1 person

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Cheryl Coleman on October 23, 2014 at 8:09am

Thanks so much Mike.  I will definitely watch the video and hopefully have my own lovely cabinets in short order.  Would love to get all my laundry stuff out of plain site.

Comment by Mike McCarthy on October 22, 2014 at 3:31pm

also, I just noticed that the photo I uploaded was taken before I put trim along the top. You can use anything you like- I used some left over door framing I had lying around.

Comment by Mike McCarthy on October 22, 2014 at 3:29pm

each cabinet is 24 inches inside the box+4.5 inches for the sides (3/4 inch plywood). Height is 36 inches, and depth is 16 inches. I used the Kreg plan I found on a Kreg video- it's on You tube as well.

All pocket joinery except for the trim along the top- I just popped it on with some 1 inch brads. I made the face frame out of poplar. Here's the video link http://www.youtube.com/watch?v=jYdCv5R786c

Comment by Cheryl Coleman on October 22, 2014 at 2:37pm

Okay I have cabinet envy right now.  This almost looks like the size of the wall I want to put cabinets in my laundry room.  Can you tell me your dimensions please?

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_