Kreg Owners' Community

Dave's Comments

Comment Wall (4 comments)

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

At 10:06pm on October 22, 2014, james wilhelm said…

You are very welcome , hope it works out for you , have a great night and fun building , JIM !!

At 10:03pm on October 22, 2014, james wilhelm said…

Dave would also stain the scrap boards with the plugs in and sanded to see how it looks , JIM !!

At 10:00pm on October 22, 2014, james wilhelm said…

Hi Dave , you can try it on the out side with some scrap  boards the same size as your project and use pine plugs, have tried the inside with out much luck !!  The only other thing that I have used are biscuits on the 45 degree ends , with glue and use the o size biscuit,s , never had any come apart !!!  Mine is a Craftsman not to expensive , and maybe you have a fellow wood worker that has one that you could borrow for your project , hope this helps , JIM !!!

At 9:26pm on October 22, 2014, james wilhelm said…

Hi Dave , welcome , if you are going to have the trim on the edges  you can drill the pocket hole,s on the out side , and plug them , if you could post a picture that would help , JIM !!

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_