Built In Desk Unit with two desk bays.
Comment
Thank You David..good luck!
Wonderful work. You are very talented. This gives me a great idea for our unfinished office space.
Rita, Thanks! The inlay is Bird's Eye Maple framed with Walnut and Gabon Ebony. The appliques on the top and bottom of the fluted columns were bought online. The are made of maple that I stained and finished with waterlox. I used the same technique on another project.
Jeff, Yup hoping on the lottery!
That is beautiful work Jon! Is that a inlay you have in the desk top? What about the decorative details? Pre-made, pre-stained and attached?
Jon;
Isn't that the truth, but at least it makes you happy and you never know you might win the lottery.
Jeff
Thanks Bruce! It is what I do but I can't say it is a living ;)
Freakin beautiful!!! If you are not doing this for a living, you need to quit your day job!!
Jon, this desk unit is gorgeous! Thanks for sharing! Keep up the awesome work!
KregRep
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community