Kreg Owners' Community

I just finished building a cross cut sled for my table saw.  I have read that I should wax the bottom of the sled to make it slide smoother across my table top.  Will someone please share with me the type of wax they use for this purpose?  Thanks in advance.

Views: 1171

Reply to This

Replies to This Discussion

Hi jeff i used beeswax on mine never had any problems with it.

Hi Jeff - I just use Johnson Paste Wax on most everything. relatively cheap as a can lasts me a long time, available most everywhere and buffs up to a nice durable finish that doesn't contain silicones.

Paraffin wax--- can also be used.

Apply it to the sled runners and miter slots. 

Paraffin is a handy material, that is useful in the shop and around the home.

Use paraffin wax, as a friction reducer.

Apply to wood draw slides, and areas of the drawer that’s exposed to sliding motion---

making for easier drawer operation.

Paraffin wax, prevents oxidation on the surface of polished steel and iron.

Gulf Wax® ‘’Household Paraffin Wax’’, a popular brand of paraffin, is a highly refined paraffin wax, that can be found in grocery stores---for in use of sealing jams, jellies, and preserves, in open top containers.

Hi Ken - forgot about paraffin - works really well but in the state you buy it, square blocks about 1/2" thick, I find it a bit hard to use. I mix it with about an equal amount of mineral oil in a double boiler until it combines. Once cooled it turns into a semi-paste that can be spread pretty easily and is durable. I have some old wooden windows it worked very well on. I also have used it on pivot points for folding wooden furniture with good luck.

Hi Jens,

I use Johnson's Paste Wax, on many objects, including my measuring tools.

The paste wax leaves a thinner coating vs the paraffin wax.

Both products offer advantages, it all depends on the end use product.

I use one or the other.

Experimenting and learning, from each product, will determine which is most suitable, for its end use.

On my skies I'd use paraffin, whereas on my cross-cut sled I use the paste wax.

We coated our bob-sleds runners and toboggans, using warmed paraffin.  

When on the slopes, the paraffin bars came in handy. The runners needed to be recoated after extended use,  or as the wax worn off.

When adjusting the cutter on the hand planes, I use the bar shaped form of paraffin.

Very thin shavings can be obtained with ease.  Safer than running one fingers across the cutting edge, to feel how far the blade extends below the base, and potentially drawing blood.  The paraffin also lubes the metal surfaces.

A plumbers candle, made from paraffin, is another useful product.  I generally keep plumbers candles in my tool boxes, around the shop and in the house.  

And, in my camping gear and in the vehicles tool box.

TIP:  keep plumbers candles in the house, in a readily accessible location, so if the power goes out, you can quickly light it up.  A plumbers candle burns longer than a household type candle.

PS---pour melted paraffin over dried wood shavings, and make easy fire starters, for camping or camp fires.  (use the bottom section of a paper egg carton---fill the cup with shavings, and pour the melted paraffin over the shavings.  Separate one or two, light it, and place it in the kindling).

Thanks everyone for the tips.  I think I will pick up both paraffin and paste to keep around the house.

One note: avoid anything with silicone in it, e.g. car wax. The silicone gets into the wood and prevents the finish from adhering.

James, 

You make a very good point.

I recall a customer saying, "What's the difference?...wax is wax".

Perhaps he just hadn't learned.

My wife uses dryer lint instead of sawdust. Your choice.

''SLIPIT'' product, offered by Rockler, is favored by many.

Slip-It reduces friction on moving wood parts. Use this specially formulated, silicone-free lubricant for wooden windows, doors, drawers and any other wood-on-wood application. Slip-It won’t gum up or cause pieces to jam, and won’t harm finished wood surfaces or skin. Applies easily with a paintbrush.

Technical Details

  • Specially formulated lubricant jelly
  • Contains no petroleum distillates
  • Silicone free
  • Designed for wood on wood movement
  • Apply with a brush

Slip-It Sliding Compound

Applied some ''SLIPIT" to sticking sliding windows---wood-on-wood and wood-on metal.

Used an acid brush, so as to get the lube into those otherwise inaccessible areas.

SLIPIT worked so well, that I now have to come up with a ''hold-open'' device, so the window doesn't slide closed on its own.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_