Kreg Owners' Community

I can't find anywhere the tool box can be bought without all of the tools included.  I already have the jigs and clamps.  Where can I buy the box?

Views: 615

Replies are closed for this discussion.

Replies to This Discussion

Orvel,

Send an email to Kreg's customer service, perhaps they know.

http://www.kregtool.com/Customer-Service-Serve.html

Yes I must agree ! I Have all the toys I just want the box to put the toys away !

Orvel,

Presently, I keep my Kreg tools, clamp and screws together in Rubbermaid Roughneck Storage containers, for immediate access. 

Store the tools in the larger size, and

the screws in the smaller size.

Stacked together on a dolly, makes it easy to maneuver around the shop.

When going to a job site, stack 'em up on a 2-wheel cart---

for ''load-and-go''.

Works for me.

Will the HD box, shown, hold the tools Orvel described?

Da Bull said:

Thanks for all the input.  I'll look into your suggestions.

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_