All the boards in this project are recycled 2x6, 2x4 and 4x4 that a friend removed from a deck he was re-building. All the pieces are joined with pocket holes using 2.5 inch screws. The bench is removable in order to reposition the planters.
Tags:
Projects: Planter Boxes
Favorite of 1 person
Comment
Very nice!
Good use of recycled materials.
Great job Rey. If you need any hot weather for your plants. I would be glad to send you some. It is to be between 92 to 98 in Alabama today. Hot Hot Hot. Thanks for sharing.
Thanks for the nice comments. The planter box on the right is not growing river rocks. There are some tiny cantaloupe seedlings just popping up in there along with one pepper plant and I'm using the rocks to increase the heat retention. We just don't seem to be getting enough sun/heat this summer. The box on the left has four tomato plants.
Excellent example of what can be done with used materials. Especially like the design and jointery work. The selection of plantings and settings of the piece along with the craftsmanship could easily make this a focal point of any garden. Rey, This planter set is a winner.
sweet.
That is really nice, it has a Japanese feel to it, I also like that you have recycled the timber in the construction of your planter. well done and thanks for sharing Rey.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community