Tags:
Rick,
This item should be in everyone's shop---
makes for accurate and speedy set-ups.
I keep mine on the bench, in my apron, and ''at the ready'' at all times, when making set-ups.
To date, I found nothing better.
The brass set-up bars, offered by Rockler, are also very useful---
they can be combined for additional heights---
http://www.rockler.com/product.cfm?page=16399.
Having 2 sets, makes it even more handy.
I frequently use them simultaneously---the Kreg and rockler set-up bars side-by side, for many set-ups and measurements.
I've added, (made my own), in 1/16 and 1/32 sizes, from brass bar stock.
For smaller than 1/32'', I use automotive ''feeler gauges'' and shim stock.
Great tools for measuring dado's, rabbits, and the like---
a. dividing stock in half---
3/8 bar for finding the center of 3/4'' stock
b. dividing stock in 3rds---for mortise and tenon joinery---
1/4, 1/4 and 1/4 for 3/4 stock,
the list can go on and on.
A very handy storage box for the brass bars, is a small Plano fishing tackle transparent plastic box, with dividers---
they can be stored in the box---
kept close at hand, or carried in your shop apron, when moving from machine to machine, when making set-ups and measurements.
Works for me.
Hi Ken - I agree that the brass setup bars are invaluable and that two sets are almost a must. I've also been looking at the Kreg set, but I cannot see the odd shape as an advantage, seems you loose the capability of stacking them unless I'm missing something here.
Ken Darga said:
The brass set-up bars, offered by Rockler, are also very useful---
they can be combined for additional heights---
http://www.rockler.com/product.cfm?page=16399.
Having 2 sets, makes it even more handy.
I frequently use them simultaneously---the Kreg and rockler set-up bars side-by side, for many set-ups and measurements.
I've added, (made my own), in 1/16 and 1/32 sizes, from brass bar stock.
For smaller than 1/32'', I use automotive ''feeler gauges'' and shim stock.
Great tools for measuring dado's, rabbits, and the like---
a. dividing stock in half---
3/8 bar for finding the center of 3/4'' stock
b. dividing stock in 3rds---for mortise and tenon joinery---
1/4, 1/4 and 1/4 for 3/4 stock,
the list can go on and on.
A very handy storage box for the brass bars, is a small Plano fishing tackle transparent plastic box, with dividers---
they can be stored in the box---
kept close at hand, or carried in your shop apron, when moving from machine to machine, when making set-ups and measurements.
Works for me.
John,
I've never considered stacking the setup bars (I would probably use gauge blocks). I have found the "odd shape" very handy for setting up the router table and the rip fence on the table saw when using a stacked dado cutter.
John Schaben said:
Hi Ken - I agree that the brass setup bars are invaluable and that two sets are almost a must. I've also been looking at the Kreg set, but I cannot see the odd shape as an advantage, seems you loose the capability of stacking them unless I'm missing something here.
Ken Darga said:The brass set-up bars, offered by Rockler, are also very useful---
they can be combined for additional heights---
http://www.rockler.com/product.cfm?page=16399.
Having 2 sets, makes it even more handy.
I frequently use them simultaneously---the Kreg and rockler set-up bars side-by side, for many set-ups and measurements.
I've added, (made my own), in 1/16 and 1/32 sizes, from brass bar stock.
For smaller than 1/32'', I use automotive ''feeler gauges'' and shim stock.
Great tools for measuring dado's, rabbits, and the like---
a. dividing stock in half---
3/8 bar for finding the center of 3/4'' stock
b. dividing stock in 3rds---for mortise and tenon joinery---
1/4, 1/4 and 1/4 for 3/4 stock,
the list can go on and on.
A very handy storage box for the brass bars, is a small Plano fishing tackle transparent plastic box, with dividers---
they can be stored in the box---
kept close at hand, or carried in your shop apron, when moving from machine to machine, when making set-ups and measurements.
Works for me.
I stack them quite a bit... set of 5 from 1/8 to 1/2" will give you up to 13/16". Set of Whiteside bars from Hartville tool is only $15 so I dunno if the Kreg bars at $40-45 is worth it to me. I got my chops busted with the multimark so I'm kinda leary.
Hugh Clare said:
John,
I've never considered stacking the setup bars (I would probably use gauge blocks). I have found the "odd shape" very handy for setting up the router table and the rip fence on the table saw when using a stacked dado cutter.
Kreg Set-up bars
Contains a set of 7
1/8'' (.125), 3/16'' (.188), 1/4''(.250), 5/16'' (.313), 3/8'' (.375), 7/16'' (.438), 1/2'' (.500)
Each 3-in-1 bars act as a step gauge, depth gauge, and fence gauge
Set-up bars vs gauge blocks:
Set-up bars ---are generally made to an accuracy of 0.005”.
Gauge blocks--- common in the metal machining industry, as ‘’precision gauge blocks’’, and made to an accuracy of 0.0002 to 0.0005’’, are much more costly,
Some sets are in the ‘’thousands of dollars’’ .
The brass-up bars, as mentioned above, do not have any size markings, on each respective bar itself.
Each bar size can be readily identifiable, by engraving each with its applicable size.
The marking can be placed on each surface, as to make each bar size visible, no matter what face side is up.
Works for me.
PS---
after engraving the markings,
fill in the characters, using a ''black'' felt-tip marker,
so as to make the markings more visible.
Works for me.
Hi Ken - The Whiteside bars I have do have the sizes stamped on them... The highlighting idea with the black felt tip is a good one.
Having a second set of ''set-up bars", sure came in handy today, on a project.
Laying 2- 3/8'' bars, side-by-side, for a 3/4'' location/position, was a lot quicker than
fumbling with and adjusting the scale of the combo square out to 3/4'', then rechecking the measurement.
Sure made it quick, and most important,
''accurate'' to within .005''.
Also another handy method for accuracy---
place the bar or bars on the blade of the combo or machinist square scale---
adjust the blade so it is flush with the bar face, and lock the head of the square in place.
''If I can't make it perfect, I make it adjustable''.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service