Tags:
not at all. it has been provided by Kreg. This is supposed to have been shipped when purchasing the DVD
Hi Andre - after checking several Amazon reviews, it appears that the plans and cut list are not included. One reviewer said you need to copy down the measurements as they show up on the dvd..
http://www.amazon.com/Kreg-V06-DVD-Pocket-Joinery-Building-Router/p...
ANDRE SWART said:
not at all. it has been provided by Kreg. This is supposed to have been shipped when purchasing the DVD
Hi John
Thank you for taking the time to comment on my request. I got the plan direct from Kreg. They apologized for not including this when i made the purchase in South Africa. I have constructed 2 for my workshop ( 1 for face framing and 1 for beading and general edging) and 2 sold to enthusiasts. The measurements are not given on the DVD for the stock, only for the height of drawers and widths, etc. I will make a general posting in time for anyone else who would like the plan, as I received this in email. The biggest challenge on this project was the first table, as we are metric and you guys are imperial so the metric (mm) are never exact, so it was cut , fit, cut some more.....
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service