Kreg Owners' Community

Welcome! The Kreg Owners' Community was designed to bring woodworkers and do-it-yourself project builders of all skill levels together to create, share, learn, and inspire each other. We encourage every member to participate in all of the great activities the Community has to offer:

Other Helpful Links:

Views: 64420

Reply to This

Replies to This Discussion

Thanks much James.  I noticed the software allowed two posters with the name "Rick."  Ugh!

Hello. Okay now, for the beginners, first thing first you need to select any simple project to get started. After that, find out which material like types of wood for woodworking for your project and then what tools you need for your project. The most important thing is, have a plan. Try to take a visit at http://shedplan-woodworkingguide.blogspot.com/ and hope it can help you a lot.

Don't wait until your first project to learn how to use it. Practice on leftover scraps to get the feel of how everything works together (the depth collar stop, jig height, etc.) to make a proper joint. Try joining like sizes of stock - say a 2 x 4 to a 2 x 4 - and different sizes, like a 1 to a 2 x 4. Remember that pocket screws can easily be removed and reused.

Grind 4 small flat spots around the stop collar, one each at the 12, 3, 6 & 9 o'clock positions.  It will keep the drill bit from rolling when you set it down. The flat spots do not have to touch each other to be effective.

Great tips, KregBrady! I'd never heard the 'flat tpots on the stop collar' idea before!

 Would love to find a happy Kreg Jig owner to tell the Company that you would demonstrate the basic and advanced utilization of their product line in our August 24-26 Woodfest in Amana, Ia.  I am coordinator of the successful show "Woodfest", sponsored by the Amana Arts Guild.  We are looking for all kinds of woodcrafters who wish to display and sell their creations.  We have invited a series of commerical companies fully realizing the dates conflict with the IWF in Atlanta, GA.  If you are one of the above Kreg Jig user or any other wood talent and are interested, details can be found on website: amanaartsguild.com and then Woodfest.  If you wish to contact me, RC, email:  woodfest@southslope.net and I will respond.  The event is free public admission.

easy: a) set the jig and the drill correctly (this is the most important) for the stock you are working with, b) clamp properly, c) do not overdrive the screws. There you have it: the abc of jig use

Of course all the other rules of woodworking go without saying; measure twice and cut one, and square et voila



Pierre Vallee said:

easy: a) set the jig and the drill correctly (this is the most important) for the stock you are working with, b) clamp properly, c) do not overdrive the screws. There you have it: the abc of jig use

Of course all the other rules of woodworking go without saying; measure twice and cut one, and square et voila



RC Eichacker said:  Did you read my call for demonstration help?  I know how to use it but looking for anyone to show expected 2500 visitors to the Woodfest.  Will keep searching.  Thanks RC



Pierre Vallee said:

easy: a) set the jig and the drill correctly (this is the most important) for the stock you are working with, b) clamp properly, c) do not overdrive the screws. There you have it: the abc of jig use

Of course all the other rules of woodworking go without saying; measure twice and cut one, and square et voila

I just tried the Kreg Jr. for the first time today. I am certain to make EVERY POSSIBLE error that can be made, and so I hope I can be of use by pointing them out as I keep learning how to use it.


My first few tries today to drill a hole with the jig weren't working at all. I had to push so hard on the drill that the jig and the piece were sliding in their clamps. Still couldn't get a proper hole drilled- the top surface was getting marred, the plastic on the jig where the drill comes out seemed to melt some and the hole still didn't get deep enough. I gave up. Then I thought to try our other drill. That worked! Lesson number 1- need a decent drill.

Then I tried making a joint. I have the right-angle Kreg clamp, but it didn't seem to have a wide enough mouth to clamp the pieces.Lesson 2- you've got to adjust the clamp!

Then I finally got the clamp in place and screwed the screw in. It barely got through into the second piece and didn't hold at all. Was their something wrong with the hole I drilled? No. Lesson three- check the screw size you need- turned out to be a 1 1/4 screw for a 3/4 inch piece, not the 1 inch I was trying.

Tried another hole. Went way too deep. Lesson 4- tighten the depth collar enough!

Like I said, if there is a mistake to make, I will make it- and try to share for the sake of other beginners at my level!

well, as they say: 'when all else fails, read the instructions'. Having said that, there are things that Kreg does not tell you. One of the main thing to emphasise is: do not over-drive the screw. Another thing they should emphasise is to very carefully adjust not only the jig, but the drill for a) the stock you are using, and b) the screw you need to use. Another thing to remember is to use a highspeed drill.  As well, coarse screws for soft and fine screws for hardwood. Note that it is crucial to adjust the drill bit exactly, you do not want to drill too deep. Hm, I think I'll write the 10 Ps of a Project for Kreg Users, watch this space ;-)

 

Max, you and I would get along just fine.

The best time to read directions is after something goes wrong! 

I've tried the other way, and it just don't work as well.

Max Taub said:

Like I said, if there is a mistake to make, I will make it- and try to share for the sake of other beginners at my level!

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_