Home built camper holding a queen size mattress and an out side galley.
Comment
Hello Rod,
I am interested in your Ketza Campa Teardrop, have you published the plans.
John Armstrong
Hello Onno,
Sorry to take so long to respond. When you build the floor frame is when you determin the over-all size of your build. My build took about a year to complete once I had the design organized in my mind and then I built on a shoestring. Thank you for the kind words and I hope that you have as much fun as I have had in my build...or is it madness...non the less have fun!
Rod
Hi Steven, There are many sets of plans at www.mikenchell.com although I made many modifications to
The Weekender plans. I went with this style because it goes with my tow vehicle...Pontiac Aztek.
Once you go there you will get "HOOKED"!
Roy, the frame came from Harbor Freight 4x8 1159lb capable. I expanded my camper to a 5x 10.
I needed the extra space to carry a queen size mattress inside.
Love to talk about the build.
fine job.should be good on the week=end trips.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community