finished table with granite on it

Comment

Comment by Steve Gronsky on May 27, 2011 at 12:52pm

Thanks Danny.  I just got the chance to look at the additional pictures.

 

I'm going to "borrow" your idea and make 2 of these for outdoors.  My granite slabs will only be about 12" square.

Comment by danny canter on May 7, 2011 at 3:38pm

Here is those photos of the support that holds the granite on the table.

Comment by Steve Gronsky on May 2, 2011 at 9:54am

Would you please show the photo such as mentioned here  --  

"the top is a drop in 3/4 in and sitting on 3 slates and the corners are rounded on the granite if that don't help let me know and I will take a photo of top out so you can see"

 

Steve

Comment by Samurai1833 on May 2, 2011 at 8:19am

Great idea!

Comment by danny canter on April 30, 2011 at 9:41pm

Its a outside table goes with the chairs that I built,I have photos of all three on my page

Comment by Steve Gronsky on April 30, 2011 at 9:34pm

Nice job Danny. Is it for indoor or outdoor use?

Comment by danny canter on April 28, 2011 at 6:48pm

27 in x 16 in and 18in tall all made from 1bye

Comment by Bob S on April 28, 2011 at 9:54am

Nice table, it's very similar in design to a kitchen island I'm building for the wife.  What are the dimensions?  My top is 47.5" x 28.5", but it's wood, not granite.  Also, I'm using cedar 4x4's for the legs.  I'll post a pic when it's done, but it'll probably be at least a month until I have time to finish it.

Comment by danny canter on April 26, 2011 at 9:17pm

the top is a drop in 3/4 in and sitting on 3 slates and the corners are rounded on the granite if that don't help let me know and I will take a photo of top out so you can see

Comment by Tom Pynaker on April 26, 2011 at 11:48am

Nice table Danny!  How did you attach the top and allow for drainage?  I really would like to build one similar!!!