Kreg Owners' Community

Red oak end table with a draw. The 1” glue-up top is made from an oak stair tread. Glue-up, drawer & everything done with the Kreg Jig.

Rating:
  • Currently 0/5 stars.

Views: 214

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Kevin P. Thornton on February 17, 2010 at 1:28am
Yes, looks Great. I'm into tung oil finish lately. 5 to 6 coats really brings out the natural beauty of the grains and gives it that rich deep, solid look that you can feel with your hands. I always catch myself knocking on it to hear how deep the sound is
Comment by Jenny on February 17, 2010 at 1:16am
I did not use a conditioner, just 3 to 5 coats of oil based stain to make it even and dark. Different pieces took the stain differently so I kept applying coats to the light sections. Then I finished it off with linseed oil which brought the grain back out a bit so the finish looks quite deep. I am pretty happy with it (finally!).
Comment by Kevin P. Thornton on February 17, 2010 at 12:57am
A beautiful piece, Did you use a pre-stain Conditioner? . You finish looks Great
Comment by Kim C on February 16, 2010 at 12:58pm
Nice!!!! Love it!
The 1" top really makes a difference!

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_