Kreg Owners' Community

Bar

Bar with live edge top. Stone and tile not my doing. But all wood work(bar, bar top,wainscoting, wine rack, Lion, back wall cabinets)
was done by me.

  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by Jon Canigiani on February 21, 2017 at 8:00pm
Thanks Allen...it is a multiple coat process. I use a Waterlox sealer coat or two. Then stain with a dye. Seal that with 4 coats of Waterlox. Black Glaze. 5 coats of Waterlox.
Comment by Allen A. Reed on February 21, 2017 at 1:22pm

If you don't mind, What kind of wood and finish technique did you use to get that rich look?

redall262b@gmail.com

Thank you so much for sharing this!!

Comment by Allen A. Reed on February 21, 2017 at 1:18pm

This is just a stunning project. Great job, You have to be proud. I sure would. I want to be able to get the time to do something like this. Awsome!!!

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_