This was made from Western Knotty Cedar using a plan from the Winfield Collection
Comment
Thanks Bullet for the nice comment on my glider, JIM
Great looking Glider James. Would you be willing to share the plans for this?
Thank,s Al and Mick for the very nice comment,s on my glider
You have done a excellent job with the Glider James, I agree with Jay the curved top rail on the back rest makes it look really good. Thank you James for taking the time to show your wonderful work. I really do appreciate it.
Jay , thank you for the very nice comment on my glider , did have a few day,s in this one !! The notch/ dado was put in by hand with my router and a special attachment on the bottom of the router to get the curb just right, very old craftsman router , HA!! Also the notch where the arm fastens to the back leg had a 12 degree angle , cut it on the scroll saw, one side was easy , the other side had to reverse the blade and cut it back wards to get the right angle , have to improvise some times , HA!! Made it for a guy,s wife for her Birthday, deliver it next week !! Have a great day , JIM !!!
Hi Jim, Now this is a very nice build with all he joinery executed like it should be done. The back is a real eye catcher as it has a nice curve in the top rail and all of the slats are well done. Like the arm and how they connect to the seat and platform. I can see all the hours of work that you put into this project but the results are well worth it. I can see nothing that I would do differently. This is a keeper with a long life of quite moment of relaxation for the proud owner. Thanks for posting.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community