Kreg Owners' Community

Good day everyone; my name is Bruno from San Diego, CA. Building dog holes on a bench top; looking for info specific on proper set up, hole distance, etc., with Kreg's bench dogs, inline clamps, and Bench Clamp With Bench Clamp Base. Thanks!

Views: 2832

Reply to This

Replies to This Discussion

Take a look on youtube for MFT table, I believe bench dogs are made at 20mm (festool) and 3/4" for Kreg.  

Bruno .. The German benchdog holes (Festool MFT) are 20mm and spaced 96 mm on center.  The Kreg workbench holes are 3/4" holes and spaced 100 mm on center  ... so it depends what size bench dogs you want to use.  Hope this helps.  

Thank you all for your responses; oftentimes, as this one time, I tend to overthink my project, and do more work than needed. Project completed!

Looks good!!

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_