I'm making a lumber cart and I need to drill holes in a 3/4 piece of vertical plywood that will then be used to attach a "lid" of 1/2 inch plywood to create a top.
So...
Jig setting vs. drill depth guide setting?
Screw size to use?
I would think I would set the Jig for 3/4 but not sure what the drill depth guide would be set for. and then whether I would use 1" or 1.25" screws.
Thoughts?
I've seen some of the charts but I keep rethinking things because they only reference the ji, not the drill depth guide.
Thanks!
Tags:
Todd,
When working with two different thicknesses the general rule of thumb is to set everything for the thinner thickness and use the corresponding screw. For example, in your situation you will want to use the 1/2" settings and then use a 1" screw. Do be careful when working with plywood to not overdrive your screw as this material will be undersized and not a true 1/2" thick. If you have any other questions please let us know.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service