Kreg Owners' Community

Hi, 

I just downloaded this plan. It calls for a half sheet (48"X48") piece of 3/4" oak plywood. 

My problem is that I can't find a reference to it any where else in the plan. 

Anyone know what's up with this? 

Thanks, 

Bob

Views: 683

Reply to This

Replies to This Discussion

Bob, 

I am unsure of the plan you are referring to.  If you could let me know where you found this so I can take a look at it I would be more than happy to assist you.  

Naturally,  I can"t find it now. All I can tell you is that the title is "Kreg Project Plan: Multipurpose Work Center". 

Thanks, 

Bob 

I have attached the plan. 

Attachments:

Bob,

   The drawing never specs. out for shelf's inside the cabinets. There is only specs for 2 upper 2 lower. I would have to say putting shelf pin hole inside the cabinets, would be where the other 3/4 plywood would be used.

Respectfully

Joe

Makes sense to me. Thanks.

Bob, 

Sorry for the delay in responding as I was having our Marketing team look this over to double check.  That piece was adding to the plan in error.  We have since corrected this error and a few other we found and the new version is available for download now.  If you have any other questions please let us know.  


Thanks very much. 


KregCS said:

Bob, 

Sorry for the delay in responding as I was having our Marketing team look this over to double check.  That piece was adding to the plan in error.  We have since corrected this error and a few other we found and the new version is available for download now.  If you have any other questions please let us know.  

I can't find the plan.Can you post the URL? 

KregCS said:

Bob, 

Sorry for the delay in responding as I was having our Marketing team look this over to double check.  That piece was adding to the plan in error.  We have since corrected this error and a few other we found and the new version is available for download now.  If you have any other questions please let us know.  

Never mind; I found it.

Bob Molloy said:

I can't find the plan.Can you post the URL? 

KregCS said:

Bob, 

Sorry for the delay in responding as I was having our Marketing team look this over to double check.  That piece was adding to the plan in error.  We have since corrected this error and a few other we found and the new version is available for download now.  If you have any other questions please let us know.  

~

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_