Right now my outfeed table is a metal frame with a mdf formica 4x7 top. I would really like to take advantage of the wasted space underneath. I was going to build some cabinets with casters and do away with the metal frame. It will probably be mostly drawers for power tools, if I use 3/4 mdf do I put pocket holes on both sides. How many casters should I use on a 4x7 base? Thanks Michael
Tags:
Michail,
Four 4" wheel Heavy-Duty locking swivel casters, located near the outermost corners, will suffice.
Make the base frame from 2x4 stock, with stretchers spaced 16" running the 4ft direction.
Caster wheels of a material that is suited for concrete.
Swivel casters will permit moveability.
Locking type will prevent movement.
Top wheels locks are better than the side side-lever locks.
Select casters that lock both in the swivel and rotation direction.
Peruse the HD casters offered by Rockler.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service