Kreg Owners' Community

Any recommendations on how to attach a K4 or K5 Jig to a Mobile Project Center? What hardware should be used?

Views: 5049

Reply to This

Replies to This Discussion

Glenn, 

The Mobile Project Center has mounting holes in the top allowing you to fasten your jig securely. All you will need are some 10-32 machines screws and nuts to hold it in place. There are nut retainers on the bottom of the table that will enable you to easily tighten your jig in place. If you have any other questions, please let us know.  

Thank you!

Here is how I mount my k3.

Attachments:

seems like it should have been designed to be fastened with at least the kreg clamps. I store my K5 in the storage case.

Why in the world didn't y'all include this information in the manual? Seems odd to me. 

Thanks for the info.

KregCS said:

Glenn, 

The Mobile Project Center has mounting holes in the top allowing you to fasten your jig securely. All you will need are some 10-32 machines screws and nuts to hold it in place. There are nut retainers on the bottom of the table that will enable you to easily tighten your jig in place. If you have any other questions, please let us know.  



Aaron Schrank said:

Why in the world didn't y'all include this information in the manual? Seems odd to me. 

Thanks for the info.

+1

There is no right or wrong way to install.

What is the Mobile Project Center? Please include photo if possible.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_