Kreg Owners' Community

Does anyone have plans for a single sink vanity

Views: 1291

Reply to This

Replies to This Discussion

Rich,
If you go to a home center, peruse the unit----take some pics, measurements, make sketches of the details.

There is a great search feature for this website. If you type vanity in it that will give you a start.

Think inside the (search) box then think outside the box (modify to suit your needs).

http://kregjig.ning.com/main/search/search?q=vanity

Once you see what others have done let your creativity kick in.

Do what I do

Go to a store and get pamphlets, in your case vanity units. In the back you usually find line drawings with sizes clearly marked. This I find is clearly a great starting point for any project. 

Rich,

Try this link. Video and plans for a bathroom vanity.  Also good information on vanity sizes.

http://woodworking.formeremortals.net/2016/01/diy-bathroom-vanity-s...

By the way I found this by following links from this Kreg post.

http://kregjig.ning.com/forum/topics/project-plans-and-inspiration

Hope this info helps, Don

Hi Rich,

Have you ever seen Ana White's site?  Depending on how wide you wanted (and your budget), she has numerous plans. This one looks fairly straightforward.  One sheet of plywood and three boards.

Link:

http://www.ana-white.com/2011/07/builder-grade-vanity

If you do a search for vanity on her site, there's 40 something vanity plans available. 

Hope this helps,

Matthew

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_