Kreg Owners' Community

My name is Marc.  I have been woodworking off and on for some 40 years and have up to now been a dowel and glued joint kinda guy.  Primarily furniture.  Cabinets, benches, bookshelves, stools, workbenches, kitchen cabinets/pantry and doors.  

But I am new to using the Kreg joining system and love it.  My first two projects have turned out great!  I am currently building a 16 x 27 inch frame out of 3/4 x 3 inch red oak for my table saw extension.  So I am curious; will I increase strength at the corners by placing the screws on the outside verses the inside?  Or possibly by placing one each way...from outside in and inside out?  The Kreg corners will be hidden by the table saw rails or the insert top either way, so visual concern is not a factor.  Thanks.   

Views: 603

Reply to This

Replies to This Discussion

Hey Marc,

When appearance is not an issue, such as on shop stands, jigs and the like I often place the screws on both sides of the joint.  From a basic engineering standpoint it seems having screws entering from two different angles would create a stronger joint.  Of course, I still use wood glue even with the Kreg system (unless its a joint I want to be able to remove later).  Extra strength can't hurt.

Don

Thanks Don.  Appreciate your helpful response.  

Don Foley said:

Hey Marc,

When appearance is not an issue, such as on shop stands, jigs and the like I often place the screws on both sides of the joint.  From a basic engineering standpoint it seems having screws entering from two different angles would create a stronger joint.  Of course, I still use wood glue even with the Kreg system (unless its a joint I want to be able to remove later).  Extra strength can't hurt.

Don

Marc,

Don is correct in that having a screw from each side would give you the strongest joint. However, this is not always possible with the given clearance in your projects. The next strongest way would be to have your holes be on the outside. This would have your screw driving to the meat of the board so that you have the entire piece supporting it. If you drive the screw from the inside you are putting the strength of the joint on the edge of your material. In most applications, this will still be plenty strong, but it does give you a possible weak spot. Hopefully that clears everything up. If not let us know and we will be more than happy to assist you. 

Perfect.  I appreciate your insight.  I had assumed the same logic, but sometimes things are not always what they appear, particularly for newbies with a new tool system.  Better to ask than sorrow later.    

Remember also that glued wood carries the strength of the wood itself.  This means that if you add a bit of glue to the joint, regardless of where you put the screw... then you are increasing the strength of the joint by leaps and bounds.  I do this when I want to make sure the joint is extra strong and not likely to be one that I intend to take apart sometime down the road.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_