Kreg Owners' Community


The all-new System Organizer is the perfect place to store and organize all of your Kreg Joinery™ system parts — your Kreg Jig®, Kreg® Clamps, Kreg® Screws, drill and driver bits, and more. A portion of the Organizer’s tray can be removed for storage of other items such as the Kreg® Shelf Pin Jig, compact drills and drivers, and more.

It’s easy to keep track of everything stored in the System Organizer thanks to a transparent lid. A pair of heavy-duty clasps ensure that lid stays shut, and a large handle makes the Organizer easier to carry and take your Kreg® tools on the go.

The System Organizer has a custom-fitted insert to hold the following items:

  • 1 Kreg Jig® (K5, K4, or K3 model)
  • Kreg Jig® K5 Storage Wings
  • 4 Standard Stepped Drill Bits
  • 7 Standard 6" or 3" Square-Drive Bits
  • 3 Stop-Collar Hex Wrenches
  • Micro-Pocket™ Drill Guide Block
  • 2 Micro-Pocket™ Drill Bits
  • Kreg Jig® HD (Heavy-Duty)
  • Kreg Jig® HD Drill Bit
  • Kreg Jig® HD Square-Drive Bit
  • Kreg® Clamps
  • Up to 6 Kreg® Screw 100-count Containers


In addition, a portion of the Organizer’s tray can be removed for storage of other items such as:

  • Up to 6 Kreg® Screw 500-count Containers
  • Additional Clamps
  • Kreg® Shelf-Pin Jig
  • Compact Drills and Drivers


It’s easy to keep track of everything stored in the System Organizer, too, thanks to a transparent lid. A pair of heavy-duty clasps ensure that lid stays shut, and a large handle makes the Organizer easy to carry.


Learn More  |  Find a Dealer

 

Retails for $39.99 (U.S.)

Views: 2092

Reply to This

Replies to This Discussion

Just got this and think it's great. Love how I can keep everything in one place. That being said, it would have been nice for it to be just a little bigger to able to house the right angle clamps as well as the wood project clamps. You can get them in there but it forces a misalignment with the lid. 

Scott,

If you just have a small amount of clamps, they  store nicely in a 5gal bucket.

If I could put all the clamps, I use, in one container, I couldn't lift or carry it.

I store my all my clamps in a separate containers.

Each type in a separate bin and labeled accordingly.

Kreg klamps

Wood screw clamps

F Clamps

Spring Clamps

C-Clamps

Banding clamps

Pipe Clamps

Bar clamps.

Plus a variety of other smaller clamps.

WorksForMe.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_