Kreg Owners' Community

Table Saw Crosscut Sled

Rating:
  • Currently 0/5 stars.

Views: 1288

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by michael evans on October 30, 2013 at 9:49am

Hi rob ,marty got the idea for the sled from me .I got it from steve ramsey on woodworking for mere mortals .Punch in woodworking for mere mortals on your computer when the site comes up you should see various project videos come up look for tablesaw sled,steve runs you thru the process of building one hope this helps .Regards mick. 

Comment by Rob Davenport on October 29, 2013 at 12:51pm

is there anyway you could send me or direct me to where i can get a cutting list/plans for the table saw sled i saw from Marty Rosenbloom?

Comment by Marty Rosenbloom on December 14, 2012 at 1:43pm

Hello David,

What you do not see are the two track/fixtures attached to the bottom of the base.

These tracks fit in the two miter slots of the table saw. So the tracks keep the sled exactly at 90 degrees. Then by placing your lumber against the front fence you will receive perfect 90 degree cuts everytime....with complete safety. Of course, the blade has already pre-cut the base, so you have a "guide" to set up with.

Comment by David Dean on December 14, 2012 at 1:32pm

cool you build it so how does it work.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_