Kreg Owners' Community

How to Build a Vintage Country Chic Lemonade Stand | Woodworking

INTRODUCTION:
Summer is here – and one of the best things about summer is freshly squeezed lemonade! When I was a kid we had a lemonade stand and I would sell it to the neighbors and kids down the street. Sadly, our sales were never that great because we had to constantly “taste test” the lemonade to make sure it was still sweet. This resulted in us drinking away most of our potential earnings. As a kid I remember how much fun it was to have a business of my own. I loved owning the entire production and distribution of the lemonade. Well, this summer I want my kids to have that same experience so I decided I would build them the best vintage chic lemonade stand ever created! In this woodworking blog post I will show you how you can build your very own DIY vintage country chic lemonade stand using materials you can find at your local hardware store. This lemonade stand will be unlike any other lemonade stand you have ever seen because it will fold flat for storing away in the winter months. Be sure to watch the How to Build a Vintage Country Chic Lemonade Stand YouTube video and don’t forget to subscribe. If you are feeling extra generous please support me on Patreon so I can live out my childhood dream.

TOOLS: Table Saw Miter Saw Orbital Sander Jigsaw Air Compressor and Nail Gun (optional) Drill Hammer Various Drill Bits Pencil Tap measure Square
MATERIALS: 60 Grit Sand Paper Wood Glue White Paint Yellow Paint Light Gray Paint 4x4 sheet 3/4in plywood 1x6 rough sawn boards 1x4 rough sawn boards 1 1/2 or 2 inch screws Hinges Paint brush Bolts and wing nuts

DIRECTIONS:
Step 1 – Watch the video and download the blueprints.
Step 2 – Go to your local hardware store and purchase the materials and supplies listed in the above Materials list.
Step 3 – Pick out your wood. The secret here is to buy the roughest wood you can find, you want it to look worn.
Step 4 – Cut the boards to size.
Step 5 – I used Rustoleum spray paint and painted the wood yellow and white.
Step 6 – After the paint has dried, you will need to seal it with a Polyurethane or clear coat. This will seal the paint from soaking up the aging paint that you will be applying in step 8.
Step 7 – Sand the entire board using a low grit sand paper. I would use nothing higher than a 60 grit. Make sure to sand the high spots as well as all the edges and corners. The more you sand, the older it looks.
Step 8 – Once you have the look you want it is now time to apply the aging coat. I went with a gray color and diluted it with water until it looked the way I wanted it. You can always darken it by adding black or brown, and it will take time for you to get it the way you want. Just know the more concentration that you have in your mixture the darker the aging coat will be. Be sure to use a scrap piece of wood to test everything on.
Step 9 – Apply the diluted mixture with a brush to all the sanded areas. Once it is applied, wipe it off with a paint rag. The longer you let the weathering mixture stay on the wood, the darker it will stain.
Step 10 – Assemble all 4 panels (Front, left/right sides and top to the frame using nails or a nail gun.
Step 11 – Install the hinges.
Step 12 – Attach the top to the base and slide in the sign poles.
Step 13 – Attach the Lemonade sign.
Step 14 – Make some lemonade and enjoy your hard work. The Vintage Chic Lemonade Stand build instructions and blueprints can be downloaded on my Etsy shop. If you don't feel like building a lemonade stand you can always custom order one on my Etsy store.

Conclusion:
Congratulations, you built your very first vintage chic lemonade stand! I hope you had fun building this project and that you and your children will love it for years to come. This lemonade stand is unique in that it can fold flat and be stored away during the off season. Please be sure to check out the other videos and blog posts and the many other amazing projects. If you have any questions please leave your comments at the end of this blog and be sure

Rating:
  • Currently 0/5 stars.

Views: 279

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

LED Lighting on mobile bench

Hi AllJust got myself a new Metabo mitre saw, kitted it out with a new Freud Pro blade as well as "pimped up" my bench with LED lighting so I can find stuff! I have 22 LED daylight tubes in my fittings in the garage so there is more than enough…Continue

Tags: blade, mitre, saw, lighting

Started by Steven Baynes in Miscellaneous Oct 8.

Ridgid tools 1 Reply

I originally bought Ridgid tools for the warranty, well I had to replace batteries. Very easy and got new batteries and chargers. Found out they don't make 24 volt tools any more, so I sent in a hammer drill, impact driver and light for replacement…Continue

Started by steve kidd in Beginners' Zone. Last reply by Glen S Oct 9.

Cabinets and the best wood choice for the carcass. 3 Replies

I am going to try and new project.  Never made cabinets before.  Researched and You-tubed like crazy.  So many opinions.  Mine are going to be:1 each= 30"W x 14"D x 38"H2 each =29"W x 14"D x 38"H1 floor to ceiling cabinet 18"W x 24"D and the height…Continue

Started by Stephanie H in Kreg Jig® Projects. Last reply by Glen S Oct 2.

1x6 into a 4x4? 4 Replies

Perhaps this question has already been asked somewhere on this forum but I wasnt able to find it after an hour or so of searching. Is there a recommended length of Kreg screw to use when combining a 1x6 into a 4x4 post. I have seen a few conversion…Continue

Tags: size, screw

Started by Dave N in Kreg Jig® Projects. Last reply by Edward Weitsman Sep 29.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

Kreg K5 Jig Review

Posted by Daris R. on November 20, 2017 at 5:39pm

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_