Thanks Al, it is very much appreciated to received positive comments. It makes the hard work a joy and your comment of appreciation is a reward that means more than the money received for doing the project. Have a Great Day!!!
Thank you Al for the nice complement on the writing desk. It was a fun and rewarding project and the customer was thrilled with the purple heart pulls and knobs. Actually they look pretty sharp in contrast against the pine.
Thanks Al. I can see this is going to be a great place to swap ideas, and teach each other different techniques and methods. I hope I can offer as much in return. I look forward to the whole experience.
At 1:08pm on February 20, 2011, Jay Boutwell said…
Thank you Al. lots of work but a very happy customer and that makes it worth while. The bow was just a little thing I was doing when I was talking on the phone one day before Christmas and I started putting some on gifts. Since this is like a gift from a customer to his wife I stuck one on it for him too. Al I visited your photos and you have some very nice projects your self. It is a very wide assortment and very well designed and one you can be very proud of. It is pretty nice to visit this kreg jig community as there is a lot of information on here and just plum chucked full of talent and knowlede. What I like about it is that there is not only just a man's thing but is for the ladies too. I have seen some great talent and very well designed and constructed projects done by the ladies on here also. Nice visiting ywith you Al and thank you for a nice complement. Keep up the great projects and share them with us all. lol
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
Al Barale's Comments
Comment Wall (10 comments)
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community
lol
Al thanks for friend invite dont see how to accept on my page.
I will work on the tool box Saturday a bit & will change the hardware.
Had to workFriday, getting busy at the shop. & Dad was sad but he said i could work with him Sat & Sunday.
Take a look www.Soloy.com AviationSoulitions
The eyes are mine, they make him handsome
Thank you Al. lots of work but a very happy customer and that makes it worth while. The bow was just a little thing I was doing when I was talking on the phone one day before Christmas and I started putting some on gifts. Since this is like a gift from a customer to his wife I stuck one on it for him too. Al I visited your photos and you have some very nice projects your self. It is a very wide assortment and very well designed and one you can be very proud of. It is pretty nice to visit this kreg jig community as there is a lot of information on here and just plum chucked full of talent and knowlede. What I like about it is that there is not only just a man's thing but is for the ladies too. I have seen some great talent and very well designed and constructed projects done by the ladies on here also. Nice visiting ywith you Al and thank you for a nice complement. Keep up the great projects and share them with us all. lol
thanks Al, I really think I can learn alot just by looking at the projects that you make
Welcome to
Kreg Owners' Community
Sign Up
or Sign In
Or sign in with:
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
New Members: Please Introduce Yourself!
Kreg KMS7102 Table Saw Precision Miter Gauge System and the DeWalt 745 Table Saw
Bench
Bench1
Videos
Miter Saw Workbench
Added by Mike Criss
The Ottoman with Secret
Added by Alex DrMaster
How to Build a Shaker Fireplace Surround - Woodworking
Added by Philip Miller
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service