Kreg Owners' Community

Justin waldron's Comments

Comment Wall (46 comments)

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

At 10:12pm on February 21, 2013, ray vile said…

Hi Justin, I just got around to a little maintence on my D C the bags you told me about sure made it easier than trying to empty and reuse the old bag. Thanks again

At 9:17am on December 22, 2012, ray vile said…

Thanks Justin, I don't know why I didn't think of amazon, I always look there no matter what I'm buying.

Merry Christmas to you and yours too.

At 11:24pm on December 21, 2012, ray vile said…

Hi Justin, I know you used to own a Harbor Freight dust collector, did you ever find the need to change the bottom bag? and if you did where did you get it from,

Thanks, Ray 

 

 

 

 

 

At 6:57am on December 18, 2012, justin waldron said…

Hey Leslee, thanks for that.  It's funny that it was such an easy project, but it was the wood that sets it off.  I'm going to be adding an addition to my garage this summer to give myself a little more room too.  I'm looking forward to your projects!

At 9:08pm on December 17, 2012, Leslee said…

 I really like your table, Justin. I like curly maple it is a beautiful piece of wood.  Your table is a work of art with the curly maple top. That side table will look really good in any room you made it. It would probably enhance other pieces in the room.

 I sure love that table you did. Really fine piece of work. Hopefully, I too could put some nice stuff out sometime next summer. Right now, I'm trying to finish on my big rebuild of my shed/shop.

At 1:59pm on September 9, 2012, Carlos said…
That would be Awsome, I will get the size when I go to my sisters house, thank you .
At 5:34pm on April 25, 2011, Gary roofner said…

What do you think of this jig?

http://www.youtube.com/watch?v=_VtVGnxlBrc

At 3:14pm on April 25, 2011, justin waldron said…
I think the price is right, but not sure how good they are.  I will post my review.
At 2:28pm on April 25, 2011, Gary roofner said…

never mind I see the 735 is 13" not 12.5 ". I see price very good from that company.

 

At 2:13pm on April 25, 2011, Gary roofner said…
Are the blades the same on the 734?  I'm think of buy the 734. In which csae I would interested in your review.
At 9:07pm on April 16, 2011, Jayson England said…
I was looking for the plans on the router cabinet. I will look through the other stuff you have created....
At 7:47am on March 30, 2011, Steve Trevisan said…

  Thanks again and I'll keep your # just incase.

 

At 8:41am on March 29, 2011, Gary roofner said…
I don't pay attention to facebook much just seen your reply. I probably will build a new router table some time this sumer. Nothing fancy but think incra fence system in combo with router table and table saw maybe the way to go. So router table info is a hot button for me. Between router form and kreg  I get a lot of good ideas. Thanks for all your help. Hows that new saw treting you?
At 8:37am on March 29, 2011, Steve Trevisan said…
    Thanks for the tips and links for the table. You did a great job and can't wait to start mine. Let u know how it goes.
At 8:25am on March 29, 2011, Steve Trevisan said…
 Thanks for the welcome and the links for the plans for the router table.It looks great and can't wait to start on min.
At 1:31pm on March 28, 2011, Steve Trevisan said…

   Great Cabinet!!! My name is Steve Trevisan And sent a friend request because I'm looking for plans for a router table like yours. Would it be possible to obtain a set of plans of your cabinet???? I'm new to kreg and would like this to be my first project. Thank you for your time.

                                                     Steve T

At 10:36am on March 11, 2011, justin waldron said…
Bill, I appreciate it!  She consistently tells me that she is the shoemakers kid since I'm always making things for other people.  Please take care of yourself and keep in touch.
At 10:12am on March 11, 2011, William Steinfeldt said…
Justin, you remind me of me 40 years ago, we look to be the same size and your lovely wife seems to be the size of my wife. I am 5 foot 14 and she is 5 foot we have been married for 43 years before the for in November 30, the exact. You have read anything ever need advice about tools, safety, do not be afraid gimme a holler. Your friend, do not call me William call me Bill
At 6:03am on March 5, 2011, justin waldron said…
Hi Buddy!  I'm thinking instead of laying the board on its side, you have to stand it up on edge and do it that way.
At 10:31pm on March 4, 2011, Corbett Price, Sr. said…

Hi Buddy!

I see I have a response already. It's late & I'm going to bed so I'll read & respond to it tomorrow.

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

LED Lighting on mobile bench

Hi AllJust got myself a new Metabo mitre saw, kitted it out with a new Freud Pro blade as well as "pimped up" my bench with LED lighting so I can find stuff! I have 22 LED daylight tubes in my fittings in the garage so there is more than enough…Continue

Tags: blade, mitre, saw, lighting

Started by Steven Baynes in Miscellaneous Oct 8.

Ridgid tools 1 Reply

I originally bought Ridgid tools for the warranty, well I had to replace batteries. Very easy and got new batteries and chargers. Found out they don't make 24 volt tools any more, so I sent in a hammer drill, impact driver and light for replacement…Continue

Started by steve kidd in Beginners' Zone. Last reply by Glen S Oct 9.

Cabinets and the best wood choice for the carcass. 3 Replies

I am going to try and new project.  Never made cabinets before.  Researched and You-tubed like crazy.  So many opinions.  Mine are going to be:1 each= 30"W x 14"D x 38"H2 each =29"W x 14"D x 38"H1 floor to ceiling cabinet 18"W x 24"D and the height…Continue

Started by Stephanie H in Kreg Jig® Projects. Last reply by Glen S Oct 2.

1x6 into a 4x4? 4 Replies

Perhaps this question has already been asked somewhere on this forum but I wasnt able to find it after an hour or so of searching. Is there a recommended length of Kreg screw to use when combining a 1x6 into a 4x4 post. I have seen a few conversion…Continue

Tags: size, screw

Started by Dave N in Kreg Jig® Projects. Last reply by Edward Weitsman Sep 29.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

Kreg K5 Jig Review

Posted by Daris R. on November 20, 2017 at 5:39pm

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_