Kreg Owners' Community

My Review of Corner Bracket Levelers (4)


Well Made

By Joe the Carpenter from Bridgewater, NJ on 11/10/2010

5out of 5

Pros: Durable, Easy To Use, Easy To Install

Describe Yourself: Avid Do-It-Yourselfer

These bracket levelers are sturdy and easy to use. I installed them on a radiator cover I built. The brackets are really solid and the feet have a smooth nylon bottom that won't scratch the floor. Will buy these again when I need them.

(legalese)

Views: 319

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by NickM on December 12, 2010 at 11:34am

Joe,

Excellent product suggestion! Thanks!

Comment by Jens Jensen on November 21, 2010 at 12:40pm
you could add lock tite if so desired
Comment by ray vile on November 16, 2010 at 3:14pm
thanks
Comment by Joseph M. on November 16, 2010 at 1:10pm
Ray, there are no locknuts. I don't see the need for one for a stationary object. The weight of the piece puts pressure on it and they don't move. However, you can easily screw on an extra nut or two if its a concern or have some other application that would require it.
Comment by ray vile on November 15, 2010 at 6:27pm
Joe do these have any way of locking them in place after you adjust them do they use a locknut underneath

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Kreg Accu-Cut and Rip-Cut 4 Replies

First off tried to mention all this to Kreg via Email and just because I live outside the USA seems that the system does not work as they say phone number invalid, which is not.OK bought a Accu-Cut and set it up no problems there worked OK both…Continue

Started by Kenneth J Hunt in Other Kreg® Products. Last reply by Kenneth J Hunt yesterday.

Router bits 4 Replies

Tungsten carbide? Skill level is beginning woodworker

Started by MINICOOPERUSAF in Beginners' Zone. Last reply by Tim Grace on Monday.

R3 part

hi all can anybody help got r3 for Xmas and I have noticed that the gray tabs are different think somebody  in assembly was talking the piss day and I have 1 metric side and imperial side so they don’t match up hellllp plzericContinue

Started by Eric Kershaw in Beginners' Zone Jan 8.

Having issues with K5 5 Replies

I watched the setup videos, searched for information and spent half a day and can not get the clamp to hold.i tightened up the screws underneath in various stages up to fully tightened, makes no difference.I do not get the two clicks and I can slide…Continue

Started by Todd Caldwell in Beginners' Zone. Last reply by Glen S Jan 7.

Product Reviews

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_