Kreg Owners' Community

I just picked up my new Kreg Mobile Project Center Item #KWS1000.

Wow!  I set it up in my basement and it is great addition to my Kreg items.  I was viewing a video where a review on this fine product was being made, which prompts my question to Kreg, and here it is.

Are plans in progress to make a 90-degree Clamp to fit the Mobile Project Center, ie:  a larger disc on the Clamp, in order to slide into the under-table track?  If such a Clamp is made for this Center, I will certainly make the necessary purchases.

The photos you see on the internet do not do this fine product justice.  It sits rock solid when set up and the many features will impress; just mind the 'pinch areas' indicated on the unit....It's worth the $$$, in my humble opinion. 

Happy Kreg Customer in BC, Canada.  

Views: 1772

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by William Burt Brown on May 8, 2017 at 10:45pm

I've seen the video sounds like a good idea might even make one to work on the clamp trak

Comment by KregRep on May 5, 2017 at 8:38am

Thanks for your purchase, and the review, John! We appreciate your feedback, and it will be passed on to the product management team. Please stayed tuned for future product announcements! In the meantime, be sure to check out these videos highlighting features of the Mobile Project Center. 

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_