Kreg Owners' Community

I went to the Dallas Woodworkers Show and purchased the items to make my Right Hand Panel Cutting Jig provide Kreg Cutting accuracy. The scale on the jig allows precise settings up to 67 inches. It works great. When cutting multiple panels or even boards, I just set the Kreg to the dimension I need and cut one after the other. I previously used a clamp and a small block of wood. Boy does this work nice. The reason I am posting it is that I had not seen anything from Kreg on this application.

Views: 336

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by KregRep on October 29, 2009 at 11:10am
For those of you who don't know what all of this is... the video below might be somewhat helpful!

Comment by KregRep on October 29, 2009 at 11:09am
Carl,
That looks like a great table saw setup! The Swing Stop (formerly Flipstop) is very nice... and in case you're ever in the market for a new one... we've just upgraded it with tight-fitting bushings (see the black pieces below) which result in less 'play' in the clamp. It's a very smooth setup.

http://www.kregtool.com/products/ka/product.php?PRODUCT_ID=47

-KregRep

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Octagonal picnic table 1 Reply

Any plans available? Worked with wood before. Just got my Kreg5. Have a camp in the Adirondacks. Workshop there.

Started by MICHAEL FLANAGAN in Beginners' Zone. Last reply by R. E. Woods yesterday.

Farmhouse Table Plans 2 Replies

Dear Kregeers,I would like to try and build a farmhouse table with extensions in the middle to seat 12.I have seen some plans on Ana White and Buildsomething, along with others. Unfortunately, most, if not all the plans are for extensions at the…Continue

Started by Lupe in Beginners' Zone. Last reply by Lupe on Tuesday.

60 inch Round Table 5 Replies

Hello my Kreg friends,I have been off this forum for some time now, but I am back.I have build a few children's 30" table and chairs - which I am very happy with the results.But now I want to build a 60" round dining table - using the Kreg system…Continue

Started by Marty Rosenbloom in Kreg Jig® Projects. Last reply by brinda Ashley on Friday.

Track Saw Cutting Board for Mobile Project Center - KWS1000 1 Reply

I've been using track saw systems for many years. I had Eurekazone system for probably 15 years and just this past year switched over to a cordless Makita system. I got rid of my EZ cutting bench and replaced it with a MPC. Liked it so much I bought…Continue

Started by Mike Goetzke in Other Kreg® Products. Last reply by David Hitt Jan 30.

Product Reviews

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_