Kreg Owners' Community

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The only complaints that I have seen is that the base is molded plastic, but at a $400 price-point ($360 with a coupon from Acme), it's $700 cheaper than any other pocket hole machine you can find.

Dust collection when hooked to a Vac is perfect, no dust.

I cut pocket holes in 22 base cabinet sides and 22 upper cabinet sides, 4 pocket holes each to attach the face-frames to and it seemed to only take minutes to get this done, at least 170 pocket holes.  This was done obviously before the cabinet was completed, the Foreman supported the sides just fine, there was no fear of tipping.

This may not be a tool that everyone needs for small projects, but if you're building any sort of cabinetry or your hands hurt from using the drill, this tool is a must have, it's solid and a time saver for sure.  It has saved me hours just on this build.  The Foreman gets 5 stars from me!

Views: 535

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by justin waldron on January 9, 2018 at 7:15am

I use the Porter Cable 20V and the Dewalt 20V, they both work very well, the P.C. have always been my go to drills for sure. 

I have build quite a few kitchens and I don't know why I waited so long to buy the Foreman.

Comment by Glen S on January 8, 2018 at 8:08am

I found a long time ago the best way to use the K5 is with a corded drill. If I have more than just 4-6 holes to drill I put the battery drill away. And that 20v Porter Cable with the 4amp battery is a hole drillin tool! The corded drill to me seems to help with that hand fatigue. But I don't drill 170 holes at a time either. lol

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Edge joining 3/4 inch plywood 2 Replies

Started by Lynn Greff in Beginners' Zone. Last reply by Lynn Greff on Monday.

Where can I get a K3 owners manual.... 3 Replies

Started by John Chasse in Beginners' Zone. Last reply by John Chasse on Saturday.

HELP! Older Kreg Precision Router Fence, need parts! 1 Reply

Started by Dan Spaulding in Beginners' Zone. Last reply by Dan Spaulding May 17.

kreg production stop extension 1 Reply

Started by Pat Meeuwissen in Beginners' Zone. Last reply by Brad Martin yesterday.

Layout/Project Setup Table 11 Replies

Started by Todd J Michalec12@gmail.com in Beginners' Zone. Last reply by Brad Martin yesterday.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_