Well had the benchtop router table a fair while now .Overall pretty pleased with it ,however another small problem i have discovered is concerning the table overhang.Its really non existent, so it does not lend itself well too clamping any auxcillary fences too the edge of the table .Which i have needed to do at times, you can clamp too the edge but you need a spacer block between the metal frame of the table and your clamp so it sits flat very fiddly.So just a suggestion to kreg would it be…
ContinueAdded by michael evans on June 22, 2013 at 3:18am — 12 Comments
Hi this is a review of the triton 2000watt router.I think its the most innovative router i have come across.The triton has 3 modes of depth setting,including a winder handle facility for table mounting.It is variable speed and loses no momentum under load.A big bonus for me its very quiet in use .Overall i give it 9 out of 10.
Added by michael evans on November 25, 2012 at 1:01pm — 3 Comments
Hi all just road tested my kreg router table , i give it 8out of 10.
PRO/s
Its well made with a nice flat table.
The insert plate top notch quality.
The plate levellers are a great idea.
Dust extraction via the fence seems to work well.
Assembly fairly simple good instructions.
CON/s
Table should come with hold down brackets.
No nvr switch had too take off my old…
ContinueAdded by michael evans on October 14, 2012 at 10:44am — 7 Comments
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service