Kreg Owners' Community

Kevin P. Thornton's Product Reviews (3)

Shaker Style End Table

This is a Shaker style end table that I made a few days ago. It was the first project I used my Kreg pocket hold jig. I watch a video on Youtube making an end table with removable legs, but I was just getting familarized with my Kreg pocket hold jig.…









Continue

Added by Kevin P. Thornton on January 19, 2010 at 11:41pm — 2 Comments

Small End Table with drawer

This is a little project I have been working on the past few days that I just finished. It is a nice little end table. As you can tell I like more of the simple Shaker style furniture. It was fairly challenging, but it was a very relaxing project and very fun to make.…











Continue

Added by Kevin P. Thornton on January 19, 2010 at 11:30pm — 5 Comments

Queen Ann Table

Project that I did. It is a Queen Ann's table. I steam bent the oak radius apron. It was a quarter inch oak three ply with a jig that I made. It was challenging because it was my first time bending wood, but it was a lot of fun. I went on youtube and watched some videos on bending wood. From there I made my jig and put the wood in my steam sauna for about an hour and a half and went in and wrapped it around my jig. All the materials I bought at Lowe's the top is poplar, the apron is red oak,… Continue

Added by Kevin P. Thornton on January 19, 2010 at 11:00pm — 3 Comments

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_