First off I am not a woodworker just a homeowner with limited DIY skill.
So far it's helped build a workbench and heavy duty shelf in the garage.
What has impressed me the most is the strength of the joints.
The workbench has been made out left over materials and scrap but it's really strong.
The system is easy to use just read the instructions grab a couple of scrap pieces of work and you will understand it in less than 30mins.
I'm really happy with it I have nearly…
Added by Rod Darmody on September 9, 2014 at 11:00am — 1 Comment
En español ver mas abajo
......................................................................................................................................................
After viewed a video of Ana White's Blog, I decided to buy a Right Angle Clamp and exceeds all my expectations.
Great quality, support, it let me one hand free, I can uses the same pressure for all the job (according with the thickness).
With this quality products (Kreg Jig Mini and Right…
ContinueAdded by José Ochoa on September 3, 2014 at 7:22pm — 4 Comments
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service