My old (circa 1982) Craftsman 1.25 HP router would not hold a large (3/4" straight @ 1/8" depth) bit securely so I did some homework and picked up the DeWalt DW618PK router. The DW618 is a 2.25 HP variable speed router with 1/2" collet. The PK indicates that it comes with both a fixed base and a plunge base and a nice soft case to carry everything.
My first use was cutting some 3/4" dadoes in a work bench top to install some T-track. I was able to set the depth stop on the plunge…
ContinueAdded by Tim Grace on March 10, 2015 at 11:00am — 5 Comments
I just bought the saw guide and watched a few YouTube videos.
I started using it and it is a great tool. It was easy to set up with my DeWalt saw.
I am planning on building some cabinets and am going to use the Rip-Cut jig.
And of course the trusty pocket-hole jig too.
Added by Paul Campolieta on March 2, 2015 at 2:30pm — 5 Comments
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service