I have finally decided to do some proper dust collection in the shop and it was a painstaking process. I have ordered the Oneida V-3000 system (which hasn't arrived yet) and will do a review on that when it shows up. Onto the pipe; I ordered it through www.blastgateco.com, which I found on the internet. The pipe and the…
ContinueAdded by justin waldron on February 24, 2014 at 12:07pm — 4 Comments
I finally got a chance to try my Kreg Jr. on a couple of 2x4 scraps. WOW!
It was EASY, FAST, and made a perfectly tight and straight joint!
I also tried one of the tampered plugs (not shown) and it fit perfect.
I am headed back to the shop to build three portable stands for my compound miter saw, router table and jig saw. I have a very small man…
ContinueAdded by Steve Kreins on February 19, 2014 at 6:52pm — 8 Comments
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service