"I used a simple 2-D drawing program called DeltaCAD. I use it quite a bit. It allows you to print any scale required. If you look close I used a 1:1 scaled print to make one og the jigs. As you can imagine there was a lot of repetitive work. For the…"
Took a lot of work but came out perfect! Kreg will like this - I used 828 HD screws to finish this project (that meant drill 828 screws too). I made fixtures & jigs to ease the repetitive construction. I know it's tall but that's to keep the rabbits…
I built this cedar cart for my ceramic grill. I used Kreg HD screws for the 2 x frame and std. screws to attach the top. It also has 7 dovetailed drawers with full extension slides and granite inserts.
"Hellow - my name is Mike. I've been a hobbyist woodworker for near 40 years now. I work out of my garage. My biggest project so far has been remodeling our kitchen/living room/dining room which included building all the cabinets myself. But, I…"
"I would use three screws. Wet soil can weigh a lot and the pressure on the sides can get pretty hefty. When I built our raised beds, I used two screws on the 1 x 6 whiteboards and they lasted several years. I also sprayed the interior with tar. The…"