Once the weather here in northern IL begins to warm up a little I think this will be my next project. I will be building a loft bed with a built in dresser. My plan is to build it in 3 pieces so…Continue
Started this discussion. Last reply by Eric Miller Apr 5, 2013.
I have a couple of Jersey's I want to build nice display frames for. Has anybody attempted this project and have any pointers they want to share?Continue
Started this discussion. Last reply by Carlos Sep 7, 2012.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
Comment Wall (2 comments)
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community
Eric - Thanks for sharing your work. You don't happen to have the dimensions that you used for all the pieces to this do you? I am looking to build something for myself but don't really have the time or know-how to throw it together from scratch. Thanks -- Jon
Eric, I viewed the three photos of your project and I see alot of promise here. It shows that you definately have the ability to make a desk to be not only of quality but also well designed. You are taking into consideration the fact that a computer needs air to cool and then making the monitor area large enough for about anything you desire to use, but also enough room to expand to something even much larger. This is planning and shows that you are thinking your design ahead. I have seen many of which have been made that just do not work out well as they are built a certain size because that is what someone else has or a store offers this size and a thus is built without taking in all the considerations needed.
This is one of the wonderful things about wood, as you are not limited to a certain size or design. The ability to build your own without copying something is what makes you a craftsman and sets your project apart for others. I like your approach and looking forward to seeing the finished project. Thank you for sharing your work.