Hi All,I just found several 1 x 3 in furring strips in the shed. I'm wondering if I can use the Kreg Jig screws to make a box, frame, table, etc.Thanks!Continue
Started this discussion. Last reply by Ken Darga Oct 21, 2015.
Hi All,I'm finishing a bathroom project with a fiberglass shower. I have a 18" opening around the top of the shower. I bought cement backer board to cover the opening. I'm not planning to tile the…Continue
Started this discussion. Last reply by Ken Darga Feb 27, 2014.
I'm thinking about mounting a flat screen on my wall. Problem is I have plaster & lathe walls. Here's my plan. Mount a 3/4" plywood backer board using 3" lag bolts to the studs big enough to…Continue
Started this discussion. Last reply by Brian Jul 21, 2013.
I'm planning to build a room on a porch. The porch has a concrete floor and to the landscaping is uneven - one side is below grade. I've done some landscaping to ensure water flows away from the…Continue
Started this discussion. Last reply by Michael R. Turner Jul 10, 2012.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service