Table-drawing
Here is the design, it is very narrow and tall to fit in a tight spot beside our tall couch.
Views: 217
Projects: Tables, Small oak table
Favorite of 3 people
Comment
-
Comment by Charlie Bell on January 27, 2010 at 12:12pm
-
Woooeee! These designs get better and better. This one even looks like It has a great possibility of inserting a drawer in the front or side. Thanks again Jenny and James.
-
Comment by Jenny on January 18, 2010 at 9:03pm
-
James - Wow! OK, I had no idea. I am definitely giving that a try.
-
-
Don – I took a look at your drawings. Wow! Yes that is much more of a plan. The hall tree is amazing.
http://kregjig.ning.com/profiles/blogs/the-hall-tree
James and KregRep – Thank you I’ll try SketchUp.
-
Comment by KregRep on January 18, 2010 at 9:02am
-
Excellent drawing, Jenny. FYI - James mentioned SketchUp... If you look in the right hand column of this pate, under the heading "Project Plans" the last item in that section is "Easy-to-Use Drafting Software". This is where you can download SketchUp for free if you're interested!
-
Comment by Don Grubish on January 17, 2010 at 9:29pm
-
Nice drawing! I'm spoiled at work where I get to draw mine out using Adobe Illustrator (CS3)
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community