Kreg Owners' Community

Table Saw Crosscut Sled

  • Currently 0/5 stars.

Views: 1288


You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by michael evans on October 30, 2013 at 9:49am

Hi rob ,marty got the idea for the sled from me .I got it from steve ramsey on woodworking for mere mortals .Punch in woodworking for mere mortals on your computer when the site comes up you should see various project videos come up look for tablesaw sled,steve runs you thru the process of building one hope this helps .Regards mick. 

Comment by Rob Davenport on October 29, 2013 at 12:51pm

is there anyway you could send me or direct me to where i can get a cutting list/plans for the table saw sled i saw from Marty Rosenbloom?

Comment by Marty Rosenbloom on December 14, 2012 at 1:43pm

Hello David,

What you do not see are the two track/fixtures attached to the bottom of the base.

These tracks fit in the two miter slots of the table saw. So the tracks keep the sled exactly at 90 degrees. Then by placing your lumber against the front fence you will receive perfect 90 degree cuts everytime....with complete safety. Of course, the blade has already pre-cut the base, so you have a "guide" to set up with.

Comment by David Dean on December 14, 2012 at 1:32pm

cool you build it so how does it work.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Kreg Accu-Cut and Rip-Cut 4 Replies

First off tried to mention all this to Kreg via Email and just because I live outside the USA seems that the system does not work as they say phone number invalid, which is not.OK bought a Accu-Cut and set it up no problems there worked OK both…Continue

Started by Kenneth J Hunt in Other Kreg® Products. Last reply by Kenneth J Hunt yesterday.

Router bits 4 Replies

Tungsten carbide? Skill level is beginning woodworker

Started by MINICOOPERUSAF in Beginners' Zone. Last reply by Tim Grace on Monday.

R3 part

hi all can anybody help got r3 for Xmas and I have noticed that the gray tabs are different think somebody  in assembly was talking the piss day and I have 1 metric side and imperial side so they don’t match up hellllp plzericContinue

Started by Eric Kershaw in Beginners' Zone Jan 8.

Having issues with K5 5 Replies

I watched the setup videos, searched for information and spent half a day and can not get the clamp to hold.i tightened up the screws underneath in various stages up to fully tightened, makes no difference.I do not get the two clicks and I can slide…Continue

Started by Todd Caldwell in Beginners' Zone. Last reply by Glen S Jan 7.

Product Reviews

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…


Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…


Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.



Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service