Comment
You're welcome, Evan.
Thanks for your thank you.
Glad to hear it was helpful for you.
Evan,
I've added lots of sliding trays to drawers.
Use maple or baltic birch for the strips---planed or sanded "smooth".
Apply a lube to the strips, and to the exterior edge of the tray, to reduce friction.
Paraffin wax, is inexpensive and available at grocery stores---
it will suffice nicely to reduce friction on sliding motion wood objects.
A slide-tray can be added to any drawer.
Simply affixing a wood strip along the sides,
for the upper tray to rest on and slide.
The slide tray can readily lifted out to access the underside.
A slide tray can be installed into a file drawer, for tool storage, and the like.
The slide-back tray is a useful feature.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community