I’ve been using Kreg pocket hole jigs since their introduction but I’ve never liked having to keep it in a case then setting it up when I needed it nor have I liked keeping it mounted to a board, left out to get dirty, dusty and possibly damaged.
I’ve been waiting for Kreg to offer a better case for their jig but they never have. So, I designed and built my own!
My case keeps my Kreg K-3 pocket hole jig protected yet ready to rock some pocket holes at all times. It also has integrated outriggers, storage for four cartons of screws, bit storage and a place to keep both the portable 3-hole adapter and single hole jigs.
I should also mention that the vacuum adapter is attached and ready to extract most of the chips but it also has an opening in the bottom so any residual dust falls out as soon as the case is closed.
Tags:
Comment
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
You need to be a member of Kreg Owners' Community to add comments!
Join Kreg Owners' Community