Kreg Owners' Community

Built this back in 2012 for a guy for his mother to display her mini light houses , glass doors and front , lighted shelfs and a light that rotated on the top !! Designed and built this from scrach as I went along , 7 1/2 feet high and the base was 36 " , brought me a pic. on a brown paper bag , did a redesign for him !!

Rating:
  • Currently 0/5 stars.

Views: 2911

Favorite of 1 person

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by james wilhelm on December 28, 2014 at 9:31am

George , Thank,s for the nice comment on my light house!!  Had a lot of time in this one , lot,s of angles to cut and fit !!  Have a great day , JIM !!!

Comment by George H Bowman Sr. on December 28, 2014 at 8:06am

I live on the Northern Outer Banks of NC in Kitty Hawk and I appreciate your craftsmanship in building this lighthouse, nice job.

Comment by james wilhelm on September 8, 2014 at 9:26pm

Kreg Rep. , thanks for the nice comments on my light house , did try to get all the details right , even put a rotating light in the house on top , one of a kind build , JIM !

Comment by KregRep on September 2, 2014 at 8:13am

Very cool cabinet, Jim. I really like that you took the lighthouse theme and ran with it, and that you even included the safety lines around the base and the upper section. Great attention to detail. Thanks for sharing!

KregRep

Comment by Dan Jackman on September 2, 2014 at 7:02am

Do you have any plans made for this? My mother would love it.

Comment by james wilhelm on September 1, 2014 at 8:25am

Thanks Mick for the nice comment , it was a challenge , but that is what makes wood working so interesting and fun !!

Comment by michael evans on September 1, 2014 at 7:36am

That light house is magic Jim ,that will keep the boats from the shore ha.

Comment by james wilhelm on August 31, 2014 at 10:46pm

Thank,s Jay , for the nice comment,s , it was a birthday present for the guy,s mother , she sent me a thank you card with a lot of little glitter light houses in the card , that made it worth all the hard work, to make some  one happy with one of my build,s !!  Did have to scrach my head to get all the angles just right , HA!!  Even put the hand rail around the top and bottom , with small post,s and chain from light and fan pull switches , btw , it dose have  rotating white light in the top , wanted to make it look real , JIM !

Comment by Jay Boutwell on August 31, 2014 at 10:14pm

Hi Jim, now this is woodworking,  That is one fine looking cabinet and how fitting it is to display light houses in.  I think this is really a piece of art as it design is fascinating.   I know was not the easiest thing to build.  Anytime you build a multi-side object it is a challenging job.  This is an excellent example of craftsmanship as it really takes your thought to a real light house and all the intriguing things we all have read about and even taken ventures into them.  Like how you put the top on and all that is missing is the rotating spot light.   Nice job and thank you for posting your work.

Comment by james wilhelm on August 31, 2014 at 10:07pm

Thank,s Ken , yes it was a fun build and one of a kind , took a few weeks , HA!! JIM !!

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Puzzle Caddy/Board

Hello All - I'm looking for a plan for a puzzle caddy to replace the frail cardboard ones we've used in the past...large main area and two smaller sorting/storing trays. If anyone has such a plan or has seen one someplace, I'd love to hear about…Continue

Tags: puzzle, Project

Started by R.J. Foster in Miscellaneous Dec 4.

Edge Joining 2" Boards 2 Replies

Hi Everyone,I appreciate all the threads on the community. I've got to use this more, you guys are great.I got my hands on some beautiful ambrosia poplar, 2 inches thick, that I want to join for a desk/counter top. Using the 2.5 inch screws and…Continue

Tags: joining, edge

Started by brian lazenby in Beginners' Zone. Last reply by michael dunn yesterday.

What type screw to use for Black Walnut 3 Replies

I have some 2" x 6" Black Walnut and need some 2 1/2" screws. To best of my knowledge Walnut is a hardwood so I need to use fine thread screws. However I can not find that length of Fine thread screws on Kregs website. Does anyone know where I can…Continue

Started by Duane Heda in Other Kreg® Products. Last reply by John Holloman yesterday.

Working in carport? 4 Replies

I share a large shop with a friend at his house, but, for the last couple years I have hardly been there to work on anything.I have moved a lot of the duplicate tools into my carport and have been working there.Does anyone else work in the…Continue

Started by Steven Brown in Miscellaneous. Last reply by Steven Brown yesterday.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

Kreg K5 Jig Review

Posted by Daris R. on November 20, 2017 at 5:39pm

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_