Kreg Owners' Community

All varnished and finished, just waiting on iron handles to arrive.

Rating:
  • Currently 0/5 stars.

Views: 1024

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by KregRep on October 30, 2014 at 12:17pm

Great job Dawn! I like the design, and it's very practical. 

The sources you gave for butcher blocks are good ones. From every source, blocks tend to be pricey. Believe it or not, one good source with very reasonable prices is Ikea. Another potential place is Lumber Liquidators. If you have either of these stores in your area, it can be a great way to go. Of course, you can also order online, but butcher blocks are heavy so shipping cost can be high from any source.

KregRep 

Comment by Dawn on October 29, 2014 at 10:47pm

Hi the legs I had already they were given to me by a friend who did not want them , the block came in a shipment with other goods from germany for our butchery so do not know were that originally came from , but I do know of http://www.osbornewood.com for legs and of the site http://www.johnboos.com/index.asp?s=r for the blocks but they are very pricey, may be looking on sites for an old butcher block that need up cycling like what I had done to the other butcher block that only needed a drawer and shelves added , 

Comment by james wilhelm on October 29, 2014 at 7:15pm

Hi , would also like to know where you purchased the legs and butcher block, nice hardware 

Comment by Dawn on October 29, 2014 at 6:27pm
Hi I purchased them on Ebay
http://www.ebay.com/itm/8PCS-Vintage-metal-Decorative-Corner-Bracke...

if you seasrch corner brackets a large sellection will show up :-)
Comment by Anthony Marshall on October 29, 2014 at 6:22pm

where do you get hardware. Is it from an online site. Thanks tony

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Measuring angle of table saw blade 1 Reply

Obviously for pocket joinery having the wood pieces cut square is critical to having a good joint.  This minimizes the likelihood of overtightening screws, as well giving a stronger more attractive joint.  Does anyone routinely measure the angle of…Continue

Tags: cuts, square, angle, saw, table

Started by Jerry A. Lambert in Beginners' Zone. Last reply by Brad Martin 10 hours ago.

Can I use standard Kreg screws for an exterior tabletop I'm building? 1 Reply

I'm building the top to my Big Green Egg table out of 2x4 cedar boards (ripped on each side to get a straight edge). I've got all my pocket holes drilled....but I'm struggling with what size screw to use.Based on Kreg's suggestions the screw length…Continue

Tags: Tabletop

Started by Jeff Novak in Beginners' Zone. Last reply by Brad Martin 10 hours ago.

Puzzle Caddy/Board

Hello All - I'm looking for a plan for a puzzle caddy to replace the frail cardboard ones we've used in the past...large main area and two smaller sorting/storing trays. If anyone has such a plan or has seen one someplace, I'd love to hear about…Continue

Tags: puzzle, Project

Started by R.J. Foster in Miscellaneous Dec 4.

Edge Joining 2" Boards 4 Replies

Hi Everyone,I appreciate all the threads on the community. I've got to use this more, you guys are great.I got my hands on some beautiful ambrosia poplar, 2 inches thick, that I want to join for a desk/counter top. Using the 2.5 inch screws and…Continue

Tags: joining, edge

Started by brian lazenby in Beginners' Zone. Last reply by brian lazenby yesterday.

Product Reviews

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

Kreg K5 Jig Review

Posted by Daris R. on November 20, 2017 at 5:39pm

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_