Kreg Owners' Community

Wine Rack (Updated

This is a wine rack I made using 3 different types of wood. The majority is reclaimed Mahogany with the "Checkered" top consisting of Walnut and Cherry. I used the Kreg Jig to assemble the project... 124 Pocket holes. It is as sturdy as a rock. The rack holds 7 bottles of wine per shelf, for a total of 21 bottles. The dimensions at 19” W x 40” L x 34” H.

  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by E Clever on July 17, 2010 at 1:11pm
Brian,
You are correct. It is an original design. I saw a similar but smaller rack (held 9 bottles) at a wine tasting in McMinnville Oregon. I have plans but I would say at the very lease they are crude. If you have any specific questions send me an e-mail. I will try to answer the best I can.
Thanks,
Eric
Comment by Brian .W.Osman on July 17, 2010 at 10:30am
Are plans available? Is so where and cost of plan.Something tells me this an orginal design?
Comment by Roberto Mena on July 15, 2010 at 9:09pm
very good. well done
Comment by Brian .W.Osman on July 1, 2010 at 4:25pm
I am so jealous such beautiful work
Comment by Derek on June 24, 2010 at 8:46am
Agreed, beautiful!
Comment by Linda Bayko on June 24, 2010 at 8:13am
That is beautiful. I love the checkered pattern at the top. :)

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_