Kreg Owners' Community

Side table

Side tables, end tables

  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo
  • photo

Comment

You need to be a member of Kreg Owners' Community to add comments!

Join Kreg Owners' Community

Comment by mark Reagle on October 12, 2012 at 7:46pm

yup sure! that's why i posted it.  If you are using poplar like i did you may want to paint over stain,  I didn't know how hard it was going to be to stain, had to sand down to 220 grit sand paper and should have done 320 on the side of the table top to blend the grain.  Other woods like oak will stain nice.   I cut the table top side 45%'s  with a tilt on the table saw, but you could use a router bit.  I just like the deeper cut i saw with the table saw.   Have fun, My wife loved them.

 

Comment by Justin on October 12, 2012 at 2:00pm

So, with your permission, I am going to copy your build here.  Fantastic tables!

Comment by David Dean on June 24, 2012 at 2:11am

cool that will be a hand me down.

Comment by mark Reagle on June 23, 2012 at 9:38pm

I have more Pic coming soon.

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_